Big CNC Sign Routers
Techno LC High Speed sign making cnc
router with 78 x 120 Cutting area.
We have a bigger one too. LC"X" 108180 (call)
You can have this signmaking CNC router working in your shop for
about $1450.00 a month (with approved credit) including the complete setup. This is a bank loan not a lease. Get yours on
order today. Use your cnc router to make channel letters and cut out acrylic letters.
Cut, Route, Engrave, Machine and Drill on this CNC router
Setup.
The package deal below includes CNC router, 5 hp HSD spindle ,
Vacuum table and 25HP pump, Engraving spindle attachment, Training, new computer to operate the router,
and EnroutePro 3D software. This system is available with a 10 week delivery.
Freight is F.O.B. New York. This is delivered complete and ready to
work.
Specs.
Model 78120 High Speed / High Power LC Series CNC
Router.
X-Axis Travel = 78.0"
Y-Axis Travel = 120.0"
Z-Axis Travel = 5.0"
System Power requirements = 110V
Includes: Tool calibration touch pad.
Drive System: Balls Screws on X,Y, and Z axes with anti-
backlash ball nuts. Drive System is closed loop DC servo
control. Comes complete with servo control card and
windows based user friendly software interface.
Repeatability: .001 inches
Max. speed: 600 in/min
Rapid Traverse: 600 in/min
Control voltage full load amperage = 6.3amps
Computer Requirements not included with machine purchase:
Pentium III / Celeron 800 Mhz, 128MB RAM or better with
full PCI Slot to handle 6" long card.
Shipping not included. See below for approx cost. Machine size as it sits
on
pallet shrink wrapped is L156"xW107"xH70" (Approx 2200lbs)
5 HP HSD Router Set with 220V, 3-phase Inverter
Includes Vacuum Hood, collet wrenches, 1/8",
1/4", 3/8", and 1/2" ER25 collets, and cover nut.
Full load amperage = 20 amps
Special Engraving head which adapts to HSD spindle.
Micro Drop Mister
Vacuum Table for Model 78120 LC Series
Includes 8 zone manifold
25HP Regenerative Vacuum Blower, 230V, 3-phase.
Rated for : 295CFM @ 14.0"Hg
Open Flow = 467CFM
Full Load amperage = 62amps
EnRoute4 PRO
Enroute4 Pro is the best sign cnc software It is a sister product of
Flexisign. Enroute Pro not only has extremely
powerful design tools, associative toolpaths,
high speed toolpath creation, true shape nesting,
but is easy-to-use. This easiest to learn and use software will get you up to speed producing parts faster.
Setup assistance and training
Travel may be an additional charge.
Other sizes are available with these features Call for
details. This is the sign makers toolbox.
|