MDX-40 Milling Machine Specifications
| MODEL |
MDX-40A |
| Acceptable materials |
Resins such as chemical wood and modeling
wax (metal not supported) |
| X, Y, and Z strokes |
12 (X) x 12 (Y) x 4-1/8 (Z)
in.
(305 (X) x 305 (Y) x 105 (Z) mm) |
| Distance from spindle tip to
table |
Maximum 123 mm (4-13/16 in.) |
| Table size |
12 (W) x 12 (D) in.
(305 (W) x 305 (D) mm) |
| Loadable workpiece weight |
8.8 lb (4 kg) |
| XYZ-axis motor |
Stepping motor |
| Feed rate |
XY-axis: 0.0039 to 1.9 in./s (0.1 to 50
mm/sec.),
Z-axis: 0.0039 to 1.1 in./s (0.1 to 30
mm/sec.) |
| Software resolution |
NC-code: 0.000039 in./step
(0.001mm/step),
RML-1: 0.00039 in./step (0.01 mm/step)(RML-1) |
| Mechanical resolution |
0.00008 in./step (0.002
mm/step)(Micro-step) |
| Spindle motor |
Brushless DC motor, Maximum 100
W |
| Spindle rotation |
4500 to 15000 rpm |
| Tool chuck |
Collet |
| Interface |
USB (compliant with Universal Serial Bus
Specification Revision 1.1) |
| Power supply |
Voltage and frequency |
AC100 to 240 +/-10%, 50/60 Hz |
| Required power capacity |
2.1 A |
| Power consumption |
Approx. 210W |
| Acoustic noise level |
No-load operation: 56 dB (A) or less,
Standby: 42 dB (A) or less |
| Dimensions |
26-3/8 (W) x 29-15/16 (D) x 21-13/16 (H)
in. |
| 669 (W) x 760 (D) x 554 (H)
mm |
| Weight |
143.3 lb (65 kg) |
| Operation temperature |
41 to 104°F (5 to 40°C) |
| Operation humidity |
35 to 80% (no condensation) |
| Included items |
Power cord, power plug adapter, USB cable,
collet, Z0 sensor, hexagonal wrench, hexagonal screw drivers, spanners,
Roland |
|
|
| System Requirements for Inlcuded
Software |
| OS |
Windows Vista®(32bit edition) or Windows®
XP (32bit edition) and Internet Explorer 6.0 or later |
| CPU |
Pentium® 4, 2.4GHz or faster
recommended |
| RAM |
1GB or more recommended |
| Free hard-disk space |
20MB or more recommended |
| Video card and monitor |
A resolution of 1024 x 768 or more
recommended, video card compatible with OpenGL recommended, and at least
16-bit |
|
|
| Optional Rotary Axis Unit
(ZCL-40A) |
| Maximum angle of rotation |
+/-18 x 105° (+/-5000
rotations) |
| Maximum loadable workpiece
size* |
4.7 in.(120 mm) diameter by 10.6 in. (270
mm) long |
| Maximum thickness holdable by workpiece
clamp |
0.4 to 1.8 in. (10 to 45 mm) |
| Loadable workpiece weight |
2.2 lb (1kg ) (including
clamps) |
| Feed rate |
0.23-11.79 rpm |
| Mechanical resolution |
0.005625 deg./step
(Micro-step) |
| Dimensions |
18.5 (W) x 11.3 (D) x 4.5 (H)
in.
(470 (W) x 286 (D) x 115 (H) mm) |
| Weight |
16.5 lb (7.5 kg) |
| Included items |
Y-origin sensors (large and small),
Z-origin sensor, Y-origin detection pin, center drill, live center, hexagonal
wrench, cap |
*The range that can actually be cut is limited by the amount
of tool extention and interference between the loaded workpiece
|
|
| Optional 3D Scanning
Sensor Unit (ZSC-1) |
| Maximum scanning
area |
12.0 (X) x 12.0 (Y) x 2.3
(Z) in.
(305 (X) x 305 (Y) x 60 (Z)
mm) |
| Distance from probe tip to
table |
Maximum 3.6 in. (92.4
mm) |
| Table load
capacity |
Maximum 8.8 lb (4
kg) |
| Sensor |
Type |
Roland Active Piezo
Sensor (RAPS) |
| Video card and
monitor |
2-5/16 in. (60
mm) |
| Video card and
monitor |
0.00315 in. (0.08
mm) |
| Scanning
method |
Contacting, mesh-point
height-sensing |
| Operating speed |
XY-axis |
0.6 to 1.1 in./s (15 to
30 mm/sec.) |
| Z-axis |
0.04 to 1.1 in./s (1 to 30
mm/sec.) |
|
|
|
| Item |
Model |
Description |
| Rotary axis unit |
ZCL-40A |
See the above specifications |
| 3D Scanning sensor unit |
ZSC-1 |
See the above specifications |
| Replacement spindle unit |
ZS-40 |
1GB or more recommended |
| Dust box |
ZDX-40 |
26.33(W) x 30.27(D) x 3.8(H)
in.
(666 (W) x 769 (D) x 97 (H) mm) |
|
|