Action CNC Routers and Supplies 

Arlington,Texas                   

817-330-9402 or 817-988-9330

   

 

 
Deals CNC router and accessories Deals Action CNC Store Financing for your cnc router Site Map

LPX-60DS/600DS/1200DS 3D Laser Scanners Specifications

MODEL LPX-1200DS
Table size Diameter 5.1 in (130 mm)
Maximum scanning area Plane scanning:Width 5 in. (130 mm), height 8 in. (203.2 mm)
Rotary scanning: Diameter 5 in. (130 mm), height 8 in. (203.2 mm)
Scanning pitch Plane scanning: width direction 0.1 to 130 mm, height direction 0.1 to 203.2 mm
Rotary scanning: circumference 0.18 to 3.6 degrees, height direction 0.1 to 203.2 mm
Repeat accuracy ±0.05mm (This figure reflects standard scanning conditions established by Roland DG.)
Maximum table load weight 11 lbs. (5 kg)
Laser Wavelength: 645 to 660 nm
Maximum output: less than 0.39 µW
(maximum output of the laser light emitted inside housing is 0.1 mW)
Sensor Noncontact laser sensor
Scanning method Spot-beam triangulation
Operating speed Table rotation speed: 9 rpm, head rotation speed: 4.48 rpm, maximum head movement speed: 7.58 mm/sec.
Interface USB interface (compliant with Universal Serial Bus Specification Revision 1.1)
Power supply Dedicated AC adapter
Input: AC 100 to 240 V ±10% 50/60 Hz 1.0A
Output: DC 19 V, 2.1 A
Power consumption Approx. 20W (including AC adapter)
Dimensions 17-7/16 [W] x 15- 9/16 [D] x 24 [H] in. (443 [W] x 396 [D] x 609 [H] mm)
Weight 77.16 lbs. (35 kg)
Packed dimensions 24-1/2 [W] x 21- 5/8 [D] x 31-7/8 [H] in. (620 [W] x 550 [D] x 810 [H] mm)
Packed weight 94.8 lbs. (43 kg)
Environment Temperature: 10 to 40ºC (50 to 104ºF) (25ºC [77ºF] or more recommended)
Humidity: 35 to 80% (no condensation)
Bundled software EZ Studio
Included items AC adapter, power cord, CD-ROM, clay, user's manual

 

MODEL LPX-600DS LPX-60DS
Table size Diameter 254.0mm (10 in.) Diameter 203.2mm (8 in.)
Maximum scanning area Plane scanning: Width 254.0mm (10 in.), height 406.4mm (16 in.) Plane scanning: Width 203.2mm (8 in.), height 304.8 (12 in.)
Rotary scanning: Diameter 254.0mm (10 in.), height 406.4mm (16 in.) Rotary scanning: Diameter 203.2mm (8 in.), height 304.8mm (12 in.)
Scanning pitch Plane scanning: width direction 0.2 to 254.0mm, height direction 0.2 to 406.4mm. Plane scanning: width direction 0.2 to 203.2mm, height direction 0.2 to 304.8mm.
Rotary scanning: circumference 0.18 to 3.6 degrees, height direction 0.2 to 406.4mm Rotary scanning: circumference 0.2 to 3.6 degrees, height direction 0.2 to 304.8mm
Repeat accuracy ±0.05mm (This figure reflects standard scanning conditions established by Roland DG.) ±0.1mm (This figure reflects standard scanning conditions established by Roland DG.)
Maximum table load weight 5kg (11lbs.)
Laser Wavelength: 645 to 660nm
Maximum output: less than 0.39μW Maximum output: less than 390 μW
(maximum output of the laser light emitted inside housing is 0.1mW) (maximum output of the laser light emitted inside housing is 5 mW)
Sensor Noncontact laser sensor
Scanning method Spot-beam triangulation
Operating speed Table rotation speed: 9rpm, head rotation speed: 4.5rpm, maximum head movement speed: 37mm/sec. Table rotation speed: 10.1rpm, head rotation speed: 4.9rpm, maximum head movement speed: 50mm/sec.
Interface USB (compliant with Universal Serial Bus Specification Revision 1.1)
Power supply Dedicated AC adapter
Input: AC 100 to 240 V ±10% 50/60 Hz 1.7A,
Output: DC 19V, 2.1A
Power consumption Approx. 20W (including AC adapter)
Dimensions 630 [W] x 506 [D] x 761 [H] mm (24.8 [W] x 19.9 [D] x 29.9 [H] in.) 500 [W] x 382 [D] x 619 [H] mm (19.7 [W] x 15.0 [D] x 24.4 [H] in.)
Weight 63kg (139 lbs.) 32kg (71 lbs.)
Environment Temperature: 10 to 40°C (50 to 104°F) (25°C [77°F] or more recommended)
Humidity: 35 to 80% (no condensation)
Included items AC adapter, power cord, AC adapter holder, cable clamps, USB cable, CD-ROM, clay, user's manual, scanning software
System Requirements for Included Software
Operating system Windows XP/2000/Me/98 SE (Second Edition)
CPU Pentium 4 processor or better recommended
Memory 512MB or more recommended
Free hard-disk space required for installation Dr.PICZA 3: 20MB or more
3D Editor: 10MB or more
Display 800 x 600 resolution and 16 bit color (High color) or more recommended.
OpenGL-compatible accelerator board recommended.
System Requirements for USB Connection
Operating system Windows XP/2000/Me/98 SE (Second Edition)
Computer Pentium 4 processor or better recommended

 

 

 

• Home Page Action CNC Routers and Supplies
◦  Directions to Action CNC
◦  General Information about cnc routers
• Deals CNC router and accessories Deals
• Action CNC Store
• Contact / Request Information about products and services
• CNC Gallery samples of what you can do with a cnc router
• CNC Machines from Action CNC Roland cnc and Techno cnc and used cnc routers
◦  Techno Pro Series CNC router machine
◦  Techno LC cnc Router system at Action CNC Routers and Supplies
◦  Techno LC Table Top quality cnc router
◦  Techno LC "X" CNC Router heavy duty cnc router without heavy duty price
◦  Techno Premium Class CNC Router Super duty cnc router
◦  Techno Big Sign Router cnc router with lots of table and durability
◦  Make ADA signage with Techno CNC
◦  Techno Patriot CNC router for small accurate cnc routing
◦  NEW Roland JWX-30 Jewelry Mill
◦  Roland JWX30 Specs
◦  Roland's rapid_prototype equipment
◦  Roland MDX-540 cnc prototype mill
◦  Roland MDX-540 cnc router features
◦  Roland MDX-540 Specs for prototype cnc mill
◦  Roland MDX-40 Desktop CNC Mill
◦  Roland MDX40a Specs cnc mill
◦  MDX40A Features Roland cnc mill for tight budget
◦  Roland Touch scanners
◦  Roland CNC Laser Scanners help your business save time and money
◦  LPX60 Laser Scanner
◦  LPX 1200 Laser Scanner
◦  Roland Laser Scanner Specifications
◦  Low cost Roland cnc Engravers for increased profits
◦  cabinetmaking_cnc router package nested base cnc router
• CNC Software from Action CNC
◦  Enroute 4 cnc Software CNC software for all of us. Cad/cam
◦  Vectric Software
◦  Rhino 3D modeling software for making 3d scanner data
◦  Visual Mill cnc router CAM software cad/cam cnc mill
◦  Roland SRP Player Pro cnc milling software for roland mills
◦  R-WearStudio for tee shirt making
• Accessories and Supplies for industrial cnc routres
◦  CNC WOW Tape for material hold down on cnc routers and hand routing templates.
◦  Techno Accessory kit for CNC router
◦  Southeast Tool Beading router bits